Designed for use with the Micro Plus and Vida families of 3D printers, the EnvisionTEC Power Protection System (PPS) DLP EU is ensures that voltage fluctuations and power outages don’t disrupt the 3D printing process. More than just a battery backup system, the PPS DLP conditions or cleans the power supply from noise and other issues that may interfere with high-value 3D print jobs, where a consistent supply of energy is crucial.
Region
Global Except for North America
Recommended 3D Printers
Micro Plus and Vida Families
Power Rating VA/Watts
250/200
Inverter Waveform
Low distortion sine wave
Transfer Time
7 ms. Typical
Frequency
60 Hz.
BTU/Hr.
120
T.H.D. Max. w/100% Resistive Load
>4% on battery
On Line Efficiency w/o Charger
86%
Input Voltage
230
Input Current
1.25 Amps
Output Voltage
230
Output Current VA/Watts
0.86/1.08 Amps
Input Voltage Range w/o Using Battery
184-276 volts
Output Regulation (mains)
+/- 10%
Output Regulation (on battery)
+/- 5%
Backup Time (full load)
>5 minutes
The Vida HD cDLM is a high-speed continuous 3D printer for the jewelry, dental and general manufacturing markets. This printer is the second offering EnvisionTEC’s patented Continuous Digital Light Manufacturing technology and offers high resolution combined with blazing speeds. In addition, the technology also reduces the need for support structures during 3D builds, meaning less finishing is necessary.
Build Envelope
90 x 50 x 100 mm (3.54 x 1.97 x 3.94 in.)
XY Resolution*
50 µm (0.002 in.)
Primary Markets
The Micro Plus cDLM’s patented technology allows for incredibly fast build speeds without sacrificing resolution or quality. Using a continuous motion of the build plate in the Z direction, prints can be completed in minutes rather than hours and still maintain 1 µm (0.00004 in.) accuracy in the Z direction.
Build Envelope
45 x 28 x 75 mm (1.8 x 1.1 x 2.95 in.)
Pixel Size in X
39.8 µm (0.002 in.)
Primary Markets