Back to All Materials
End Use
High flexural modulus and strength in a hydrophobic material that produces super tough parts, with nearly 4x the impact resistance as most engineering plastics.
Stiffness combined with toughness make this material ideal for use in a wide variety of impact-resistant medical devices.
Print soft, flexible parts with functional end performance, complex geometry, and fine feature sizes.
EnvisionTEC's Rubber Elastomer E-RE70 is an elastomeric material with a tough rubber-like performance.
EnvisionTEC's E-RE90 is an elastomeric material with a tough, rubber-like performance, allowing for the 3D printing of parts previously made from technical foams, rubbers, or polyurethanes.
A semi-translucent silicone, E-UA40 has good tear strength and excellent energy rebound. It is also good for general purpose elastomer parts such as robotic grippers.
A semi-translucent silicone, E-UA90 is a good for general purpose elastomer parts such as robotic grippers.
Loctite E-IND402 is an elastomeric UV photocurable resin that exhibits high resilience while maintaining excellent tensile strength. It is a single component system with excellent green strength and does not require thermal post processing.
Loctite E-IND406 HDT100 High Elongation is a high-strength engineering plastic with good impact resistance, high temperature resistance, and record elongation at break.
Loctite E-3955 FST HH is a high performance, high modulus product which boasts excellent flexural and tensile physical properties with outstanding flame retardance.
Loctite E-3840 is low viscosity, one-component light-cure acrylic resin used for prototyping via digital light processing (DLP) or Continuous Digital Light Manufacturing (cDLM). It cures with short exposure times which results in fast print speeds and provides very high print resolution which is ideal for parts that require fine features.
Loctite E-5015 is a one-component, light-cure silicone resin with high durability and flexibility. It offers high resolution printing of shore A70 silicone with good print-speeds.
Loctite E-3843 is a black resin that may be used for prototyping or functional parts production. It offers good Impact resistance and thermal stability making it suitable for many demanding Engineering applications.
E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts that can be used for prototypes and end use. Available in translucent amber, gray and black, E-RigidForm has high tensile strength (68-73 MPa) that compares with acrylic, nylon 6 and polycarbonate. It also delivers good heat deflection and water resistance. With a hardness value of Shore D 87, the same value as a cast urethane plastic, E-RigidForm is a versatile and tough material that is ideal for a wide range of industrial and consumer applications.
This advanced, engineering-grade material delivers large castable patterns and functional prototypes with best-in-class accuracy and surface finish. FormCast is formulated for use on EnvisionTEC's 3SP family of printers.
This advanced engineering-grade material is a polyurethane-like material that produces a final material with soft Shore A values of 40 or 80 depending on your needs. E-Shore A is a material developed for end-use applications such as footwear, sporting goods, and other uses requiring durability, comfort and flexibility.
E-Rigid PU is a polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics. Available in black, natural and white, E-Rigid PU is hard and stiff but also maintains good strength, marked by flexibility and impact resistance. With a Shore D hardness values similar to the value as a cast urethane plastic, E-Rigid PU is a versatile and tough material. It is also an excellent solution for 3D printing dental diagnostic waxups.
EnvisionTEC’s E-Poxy is a partially biosourced, tough, dual-cure material that delivers strong, thin-walled final products. E-Poxy offers a good relationship between flexibility, hardness and heat resistance that is also ideal for connectors, among other objects.
EnvisionTEC’s E-CE is a stiff, heat-resistant, high-performance dual-cure material that also offers chemical resistance. It is perfect for industrial products that require thermal stability such as electronics encasements and under-the-hood parts.
EnvisionTEC’s E-Glass 2.0 material is a transparent material for use on EnvisionTEC's 3D Printers. Featuring excellent surface finish quality and feature resolution, E-Glass 2.0 is an ideal 3D printing solution for simulating clear plastics.
E-Model Beige printing material for DLP and cDLM 3D printers is the perfect choice for orthodontic models for thermoforming aligners over.
E-Model Light DLP printing material for DLP and cDLM 3D printers is the perfect choice for a wide variety of high-accuracy dental modeling needs.
ABS Hi-Impact 3SP is a tough material, suitable for high quality prototypes of items in categories such as automotive and consumer goods as well as stable enough for production-quality end use parts.
The EnvisionTEC E-Clear series is a liquid photopolymer that produces strong, tough, water-resistant parts especially for applications in the custom hearing device market.
