Now available in beta, E-Tool 2.0 is filled with Barium Borosilicate Glass, known for its heat and chemical resistance, to deliver injection molds that can withstand high heat and pressure. Combined with EnvisionTEC’s 3D printing technologies, E-Tool 2.0 delivers highly accurate tooling with an exceptionally smooth surface finish.
Now in testing with a German injection molding company, E-Tool 2.0 molds were successfully used for injection molding of Polypropylene (PP; Injection temperature: 370ºF to 400ºF Mold Hold Press Pressure: 22T) and Polyethylene (PE; Equistar 6580. Injection temperature: 325ºF to 365ºF. Mold Hold Press Pressure: 22T).3
*EnvisionTEC highly recommends requesting a sample or benchmark in this material to ensure the material meets your specific injection molding needs.
Physical Properties
Tensile Strength
49.4 MPa
Elongation at Break
1.46%
Tensile Modulus
4660 MPa
Flexural Strength
82 MPa
Flexural Modulus
5220 MPa
Izod Impact Notched
18.9 J/m
HDT at 1.8 MPa (264 psi)
63°C
Shore Hardness, D
89
Viscosity at 30°C
1460 cP
Minimum wall thickness
2.5 mm
Color
Yellow