One of the most popular production casting materials in the EnvisionTEC portfolio, PIC 100 Series is the company’s original Plastic Investment Casting (PIC) material with no wax content.
Three times harder than carving wax, PIC 100 delivers stiff parts with crisp detail and exceptional surface finish, including thin walls and intricate details. PIC 100 is ideal for parts up to 5 grams finish weight, such as bridal jewelry.
EnvisionTEC recommends casting EPIC with Ransom & Randolph’s PlastiCast PT or other extra-high-strength investments. Parts printed in PIC 100 burn out clean at moderate temperatures, leaving no ash for clean castings.
Viscosity
361.7 MPa
Tensile Strength
16.8 MPa
Elongation at Break
7.46%
Flexural Strength
23.0 MPa
Flexural Modulus
404.0 MPa
Bending Strain
10.2%
Izod Impact – Notched
11.03 kJ/m2
Density
1.178 g/cm3
Hardness (Shore D)
69
Ignition Temperature
350°C
Colors Available
Gold, Green