• Press-E-Cast
  • Press-E-Cast
  • Press-E-Cast

Press-E-Cast

Castable • Dental

Press E-Cast is a wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish. Can also be used to print partial frameworks.

The burnout for parts 3D printed in Press-E-Cast is rapid, clean and ash-free, resulting in accurate, quality castings. With a moderate wax content, Press-E-Cast also delivers low thermal expansion during burnout. Details on casting Press-E-Cast can be found in this Best Practices document.

Parts 3D printed in Press-E-Cast can be pressed into full contour ceramics.

Physical Properties

Tensile Strength

56 MPa

Elongation at Break

3.5%

Flexural Strength

115 MPa

Flexural Modulus

3350 MPa

HDT (Heat Deflection Temperature) No heat treatment necessary

140° C (284°F)

Recommended Machines