End Use • Prototyping • Manufacturing
E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts that can be used for prototypes and end use.
Available in translucent amber, gray and black, E-RigidForm has high tensile strength (68-73 MPa) that compares with nylon 6 and polycarbonate. It also delivers good heat deflection and water resistance.
With a hardness value of Shore D 87, the same value as a cast urethane plastic, E-RigidForm is a versatile and tough material that is ideal for a wide range of industrial and consumer applications.
Physical Properties
Based on Following Post-Cure
UV SCU 2 x 60 min
Tensile Strength
68 – 73 MPa
Elongation at Break
6-7%
Tensile Modulus
2950 – 3250 MPa
Flexural Strength
120 – 126 MPa
Flexural Modulus
3340 – 3570 MPa
Hardness, Shore D
87
Heat Deflection Temperature @ 1.82 MPa
62.5°C
Impact Izod
30 J/m
Viscosity
460 cP @ 30°C
Water Absorption
0.67% at 48 hours
Available colors
Amber, Charcoal