3D Bioplotter Research Papers
Direct Ink Writing of Fully Bio-Based Liquid Crystalline Lignin/ Hydroxypropyl Cellulose Aqueous Inks: Optimization of Formulations and Printing Parameters
Following the recent demonstration of the potential to direct ink write lyotropic blends of organosolv lignin (OSL) and hydroxypropyl cellulose (HPC), this study aims to optimize the formulations and direct ink writing parameters for fully bio-based lignin/HPC inks. A prescreening identifies the theoretical window of printability for different compositions for formulations based on OSL solutions of 45, 47.5, and 50% solid contents and OSL/HPC wt %/wt % ratios of 30/70, 40/60, and 50/50. Measurements of shear–viscosity and recovery behavior evidence the shear-thinning contribution of HPC and the viscosity recovery contribution of lignin. Shape fidelity, morphology, and mechanical properties of printed…
Tough and Processable Hydrogels Based on Lignin and Hydrophilic Polyurethane
Lignin is a low-cost, natural polymer with abundant polar sites on its backbone that can be utilized for physical cross-linking of polymers. Here, we use lignin for additional cross-linking of hydrophilic polyether-based polyurethane (HPU) hydrogels, aiming to improve their mechanical properties and processability. Without reducing the swelling, simple addition of 2.5 wt % lignin increases the fracture energy and Young’s modulus of HPU hydrogels from, respectively, 1540 ± 40 to 2050 ± 50 J m–2 and 1.29 ± 0.06 to 2.62 ± 0.84 MPa. Lignin also increases the lap shear adhesiveness of hydrogels and induces an immediate load recovery of…