Otoflash Post Curing Light Pulsing Unit


The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.

Machine Properties

Inner Chamber Dimensions

120 x 120 x 50 mm (4.72 x 4.72 x 1.97 in.)

Curing Chamber Access

Top Loading

Operating Voltage

100,115,230,volt AC, Selectable

Nominal Frequency

50/60 Hz

Power Input

About 250 W

Radiated/Flashed Lamp Power

About 200 W (100 X/Lamp)

Light Power

Ca. 1/3 of lamp power ≈ 66 W

Spectral Distribution

300-700 nm, max 400-500

Light Power in Interesting Spectrum

Ca 1/3 of lamp power ≈ 11 W

Flash Rate

10 flashes per second

Digital Timer

Adjustable from 1 up to 9999 flashes

Life Time

300-500 hours operating time (10.8 – 18 Mio flashes)

Outer Dimensions

310 x 310 x 140 mm (12.2 x 12.2 x 5.51 in.)


6kg (13.23 lbs)