Castable • Dental
Press E-Cast is a wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish. Can also be used to print partial frameworks.
The burnout for parts 3D printed in Press-E-Cast is rapid, clean and ash-free, resulting in accurate, quality castings. With a moderate wax content, Press-E-Cast also delivers low thermal expansion during burnout. Details on casting Press-E-Cast can be found in this Best Practices document.
Parts 3D printed in Press-E-Cast can be pressed into full contour ceramics.
Physical Properties
Tensile Strength
56 MPa
Elongation at Break
3.5%
Flexural Strength
115 MPa
Flexural Modulus
3350 MPa
HDT (Heat Deflection Temperature) No heat treatment necessary
140° C (284°F)